Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Replace the rear brake pads / shoes on Dacia Logan 1

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Brake pads
Operation: Replace the rear brake pads / shoes on Dacia Logan 1

In today's video we will see how to remove and replace the rear brake pads or shoes on a first generation Dacia Logan, following these simple steps. First of all we lift the car, even only from the rear side, and we go to remove the wheel, unscrewing the bolts; after which we remove the drum nut cover, prying the sides with something thin, as shown in the video. At this point we use a 30 mm socket wrench to unscrew the nut and remove the drum; we just have to remove the old jaws and replace them with new ones!


Posted on 2 February 2024 by ScegliAuto



How to replace the taillight and the third brake light bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) Below we will see the procedure for disassembling and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First
Removal of front and rear logo and bumper
Dacia Logan Dacia Logan body parts assembly and disassembly video
How do you replace the third brake light bulb on your Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the third stop light bulb on your Dacia Logan, you need to open the tailgate, so that you can access the components located insid

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos