Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to reset the Dacia Duster service

Dacia Duster - Video tutorial

Model: Dacia Duster MK 1, HS - Years 2010-2017
Part: -board computer
Operation: How to reset the Dacia Duster service

Let's see in today's video how to reset the service warning light in the Dacia Duster. This is an operation to be carried out after carrying out the service, to confirm to the car that this has happened. Let's go aboard the car, positioning ourselves in the driver's seat. Let's now turn the key to position one. We hold down the accelerator and at the same time press the brake pedal three times. Let's turn off the car now. At the next restart we will see that the annoying warning light will have gone out and we will be able to continue walking safely. As you have seen, this is a quick and simple operation.


Posted on 3 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Duster 2017-2024 - What do the dashboard indicators of the Dacia Duster indicate? Read Answer
    • Duster 2010-2017 - Why is the DAB radio in the Dacia Duster not working? Read Answer
    • Duster 2017-2024 - How to reset the tire pressure warning light on Dacia Duster 2019? Read Answer
    • Duster 2017-2024 - Where do i find the car radio code on Dacia Duster? Read Answer
    • Duster 2017-2024 - What does the orange warning light mean in the Dacia Duster? Read Answer
    • Duster 2017-2024 - Where is Cruise Control on the Dacia Duster activated from? Read Answer
    • Duster 2010-2017 - How to retrieve and enter the code in Dacia Duster? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos