Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Sandero
  6. : How to reset the TPMS warning light on the Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: -board computer
Operation: How to reset the TPMS warning light on the Dacia Sandero

If you notice the tire pressure warning light on the instrument panel of your Dacia Sandero, do not be alarmed because you just need to inflate or replace them to solve the problem. If this is not enough then you must necessarily perform the following manual reset procedure. Insert the key and turn on the instrument panel. Use the button located at the end of the right stalk of the steering wheel to navigate within the on-board menu and locate the item "Set TP". At this point, hold down the same button you used previously and release it as soon as the reset is complete.


Posted on 16 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sandero 2021-2028 - Why is the infotainment system of the Dacia Sandero 3 not working? Read Answer
    • Sandero 2008-2012 - How to reset the inspection interval on Dacia Sandero? Read Answer
    • Sandero 2012-2020 - How to reset the service warning light on the Dacia Sandero? Read Answer
    • Sandero 2021-2028 - What spies does the Dacia Sandero have? Read Answer
    • Sandero 2021-2028 - What does the multifunction warning light mean on the Renault Sandero? Read Answer
    • Sandero 2012-2020 - What does the multifunction warning light on the Dacia Sandero indicate? Read Answer
    • Sandero 2012-2020 - What does the Dacia Sandero tire warning light mean? Read Answer
    • Sandero 2021-2028 - What does the orange light on the Dacia Stepway mean? Read Answer
    • Sandero 2012-2020 - What does the orange multifunction warning light on the Dacia Sandero mean? Read Answer
    • Sandero 2012-2020 - What is the meaning of the warning lights on the Dacia Sandero Stepway? Read Answer
    • Sandero 2021-2028 - What warning lights are there in the dashboard of the Dacia Sandero Streetway? Read Answer
    • Sandero 2012-2020 - What does the Dacia Sandero spy service mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos