Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020

Knowing the exact location of the OBD port on your Dacia Sandero is very important as it allows you to quickly connect a diagnostic tool if needed. If you don't know where it is, don't worry as you will find all the necessary information below. Once you have parked the car safely, turn it off completely and enter the vehicle (passenger side). Fully open the glove compartment and locate the OBD port at the rear of it. Finally, do not forget to close the glove compartment again.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the 2017 Dacia Sandero
Where to Find the OBD Port on the 2017 Dacia Sandero
Dacia Sandero (2012-2020 / B8) If you own a second generation Dacia Sandero, particularly the 2017 model, you can use the following procedure to easily locate the OBD port of the v…
Where is the OBD port located in the Dacia Sandero 2?
Where is the OBD port located in the Dacia Sandero 2?
Dacia Sandero (2012-2020 / B8) If you are looking for the OBD port inside your second series Dacia Sandero, all you need to do is carefully read the following guide and follow the …
Where is the OBD port located in the 2017 Dacia Sandero?
Where is the OBD port located in the 2017 Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In this new guide of ours, we will explain the various steps you need to follow if you intend to independently locate the OBD port inside your 2017 D…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer
    • Sandero 2012-2020 - When is the first service done on the Dacia Sandero? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos