Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2018 Dacia Sandero Stepway?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Service warning light

Follow the instructions in the video to reset the service light on the Dacia. This procedure takes only a few minutes and applies to Sandero, Duster, and Logan models. In vehicles equipped with a trip computer, simply press and hold the button used to access the menu for about 10 seconds. This button is located at the end of the wiper stalk. In vehicles without a trip computer, turn on the ignition and press the accelerator pedal while pressing and releasing the brake pedal three times. After this, you can release the brake pedal and turn off the ignition.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to reset the service light on the Dacia Sandero Stepway?
How to reset the service light on the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) This video guide explains how to reset the service light on the Dacia Sandero Stepway. First, remember to turn on the instrument cluster. Then, follo…
How to Reset the Service Light on a Dacia Sandero Stepway
How to Reset the Service Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) In this video, we can see how to reset the service light on a Dacia Sandero Stepway. First, to perform the service reset, the vehicle must be secured…

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the "Service" warning light on a Dacia Sandero Stepway mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos