Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch in a Dacia Duster?

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Power window switch

In this tutorial, see how to replace the main window switch in a Dacia Duster, an extremely simple and quick operation. For this, you will only need a flathead screwdriver or, if available, a plastic trim tool. First, open the driver's door, then insert the trim tool into the gap of the switch panel, lever it around the entire perimeter, and unclip it from the base. Once done, disconnect both connectors by unlocking the respective clips, connect them to the replacement, and secure it in its housing.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
How to deactivate the passenger airbag of a Dacia Duster
How to deactivate the passenger airbag of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Through this very useful video guide, we can see how to deactivate the passenger side airbag of a Dacia Duster, first generation model produced from …
Where are the Fuses in a Dacia Duster?
Where are the Fuses in a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) The fuses in a Dacia Duster are located within two fuse boxes installed in the vehicle: one is in the cabin and the other in the engine compartment. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos