Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

In today's video, see how to replace the timing belt on a Dacia Duster (or the equivalent Renault model in markets where it is sold under that brand). Start by opening the bonnet and locating the component to be worked on. Next, remove the auxiliary belt from its components (e.g., tensioner) and then take it off. Once this is done, proceed to fit the new unit, ensuring the belt is kept taut.

After this, run the engine for a few minutes before driving. Remember to use the recommended original parts.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Dacia Duster 1.5 dCi
Replacing the Timing Belt on the Dacia Duster 1.5 dCi
Dacia Duster (2010-2017 / MK 1, HS) Today we will see the instructions that will allow us to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, open the vehicle's bo…
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Dacia Duster (2010-2017 / MK 1, HS) Here are the main steps to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, raise the vehicle and remove the front right wheel …
How to Replace the Timing Belt on a Dacia Duster?
How to Replace the Timing Belt on a Dacia Duster?
Dacia Duster (2010-2017 / MK 1, HS) To replace the timing belt on a Dacia Duster, loosen the screws securing the cover on the left side of the engine block, and also those securing the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos