Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery of the Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Key

Below are the steps on how to disassemble and replace the battery of the electronic key remote for the Dacia Duster. First, take the remote in hand and start by removing the plastic rear cover, using a thin and pointed object to pry it open. Then, remove the small battery found inside, as shown in the video. At this point, install the new battery of the correct type; insert it the right way round and reassemble the remote, following the tutorial video until the end!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery on a Dacia Duster Key
How to Change the Battery on a Dacia Duster Key
Dacia Duster (2010-2017 / HS, MK 1) Is the battery in your Dacia Duster key damaged? Here’s how to change it from the remote. Take your remote and, using a screwdriver, separate the key…
How to Replace the Key Fob Battery in a Dacia Duster
How to Replace the Key Fob Battery in a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Today, we will discover the procedure and instructions that will allow you to disassemble and replace the battery in the key fob of the Dacia Duster.…
Replacing the Key Fob Battery for Dacia Duster - Sandero
Replacing the Key Fob Battery for Dacia Duster - Sandero
Dacia Duster (2017-2024 / HM, MK 2) This guide outlines the steps to disassemble and replace the battery in the key fob (Keyless) for the Dacia Duster and Sandero. First, take the key f…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - What does the Dacia Duster wrench warning light indicate? Read answer
    • Duster 2010-2017 - Cost of duplicate Dacia car keys? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos