Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset and Update the Medianav Multimedia System in the Dacia Sandero - Renault Clio

Model: Dacia Sandero B8 - Years 2012-2020
Part: Checks and maintenance

In this brief and simple guide, you will see the steps to reset and update the Medianav multimedia system in the Dacia Sandero, as well as in the Duster and Renault Clio. First, get inside the vehicle and go to the settings; then check the software version of your multimedia system, updating it via a USB stick (with the software inside), as shown in the video. Wait for the reset and update of the multimedia system, following the video tutorial until the end!

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2008-2012 / BS) In this video, learn how to remove the central panel of the medianav on a Dacia Sandero. After installing the reverse camera and routing all the powe…
Dacia Sandero (2012-2020 / B8) In this video tutorial, you will find instructions to update the navigation system and multimedia system of the Dacia Sandero and Duster. First, down…
Dacia Sandero (2012-2020 / B8) .. Dacia Sandero, as well as on a fourth-generation Renault Clio. First, get in the car and turn on the ignition; then press the button located on the wiper.. …

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos