Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Duster
  6. : How to replace the front headlight bulbs of the Dacia Duster.

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Headlight bulb
Operation: How to replace the front headlight bulbs of the Dacia Duster.

Today we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Dacia Duster. First of all, we open the engine hood and start by removing the plastic protective cap of the bulbs; then we disconnect the electrical connector and release the metal clip to remove it, as shown in the video. At this point, we replace the bulb with the new one, of the right type and with the same attachment (in this case, H1 type); we insert it into the headlight assembly and make the electrical connection, adjusting the headlight height if necessary.


Posted on 26 January 2024 by ScegliAuto



How to replace the front headlight bulbs of the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In the video presented here, we can see how the author replaces the front headlight bulbs (H7 and H1) in a first-generation Dacia Duster. The YouTube
How to replace headlight bulbs on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to remove the headlight bulbs on a Dacia Duster: open the front hood by pulling the lever located at the bottom right of the dashboard,
How to replace the bulbs on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to replace the headlight bulbs of the Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash

Other guides that may interest you

    Frequently Asked Questions

    • Duster 2010-2017 - How to replace the sidelight bulbs in the Dacia Duster? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos