Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to replace the front headlight bulb of the Dacia Duster.

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Dacia Duster.

If you do not know how to replace the headlight bulb of your first generation Dacia Duster (year 2010-2017), do not worry because you will find all the necessary steps in this dedicated guide. First of all, turn off the car and fully raise the front hood. At this point, position the safety arm correctly and remove the protective cap located at the back of the headlight. Finally, remove the bulb holder and proceed with the replacement of the old bulb with a new one that is perfectly compatible.


Posted on 1 February 2024 by ScegliAuto



How do you replace the headlight bulb on your Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Changing the bulb of the Dacia Duster is possible by opening the bonnet, so that the rear part of the corresponding headlight can be accessed. Here i
How do you replace the headlight bulb on your Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In order to replace the headlight bulb of the Dacia Duster you have to go and open the bonnet, so that you can have access to the components located
How to replace the headlight bulb on the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In order to replace the headlight bulb on the Dacia Duster, you need to open the hood to access the rear part of the headlight where the bulb needs t

Other guides that may interest you

    Frequently Asked Questions

    • Duster 2010-2017 - How to replace the sidelight bulbs in the Dacia Duster? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos