Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Dacia Sandero MK2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Service warning light

In this video, we see how to reset the service light on the Dacia Sandero MK2: get in the car and close all the doors, then put it in neutral: within ten seconds, turn on the instrument cluster and then press and hold the accelerator pedal fully: while holding the pedal, press the brake pedal fully three times. After the third braking, release both pedals at the same time. Now you can turn off the instrument cluster and then turn it back on to check if the procedure was successful; if not, it is advisable to repeat it.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Dacia Sandero
How to reset the service light of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) The service light of the 2021 Dacia Sandero 3 is activated when it is necessary to perform maintenance on the vehicle. After carrying out the checks …
How do you reset the Service light of the Dacia Sandero Stepway?
How do you reset the Service light of the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero Stepway, you will need to turn on the instrument panel by inserting and turning the ignition key into…
How to Reset the Service Light on a Dacia Sandero?
How to Reset the Service Light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) As a reminder for the regular maintenance of your car, in this case, we refer to the Dacia Sandero in the video, there is the Service light, which is…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the "Service" warning light on a Dacia Sandero Stepway mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos