Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Centre Console of a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Center console tunnel

See other generations:
Video tutorial

This guide shows how to dismantle the centre console of a first-generation Dacia Duster. Start by undoing the three screws of the centre console located in the three cup holder compartments plus two additional screws on the sides of the console under the dashboard.

Then lever the top of the console and remove it, disconnecting its wiring. After this, using a socket spanner, remove the nut located in front of the gear lever and also remove the panel containing the 12V socket.

Finally, completely dismantle the centre console.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Vents from a Dacia Duster
How to Remove the Cabin Air Vents from a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before you can start, enter the cabin. Begin by inserting the tip of a small flathead screwdriver into the gap between the air vent frame and the das…
How do you replace the external rearview mirror of the Dacia Duster?
How do you replace the external rearview mirror of the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) To replace the external rearview mirror of the Dacia Duster, you need to loosen the screws that secure the door panel to its housing: the screws to l…
Installation of a 2DIN car stereo in a Dacia Duster
Installation of a 2DIN car stereo in a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) In this video, we see how to install a 2DIN car radio on a Dacia Duster: we start by removing the plastic frame around the factory radio, which is he…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos