Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Daihatsu Copen

Model: Daihatsu Copen MK 1 - Years 2002-2012
Part: Engine oil

This short guide will illustrate the steps to perform the routine maintenance service by changing the engine oil and oil filter on the Daihatsu Copen. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the oil filter using the appropriate tool as shown in the video. At this point, screw in and gently tighten the new oil filter cartridge. Open the engine bay and top up the oil to the maximum mark!

Updated on 29 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Filter on the Daihatsu Copen
How to Replace the Air Filter on the Daihatsu Copen
Daihatsu Copen (2002-2012 / MK 1) These brief and simple steps will show you how to remove and replace the engine air filter on the Daihatsu Copen. First, open the bonnet of the vehic…
How to Replace the Air Filter in the Daihatsu Copen?
How to Replace the Air Filter in the Daihatsu Copen?
Daihatsu Copen (2002-2012 / MK 1) In this tutorial, you will see how to replace the air filter in the Daihatsu Copen, an extremely simple and quick operation. First, ensure that the e…
How to Replace the Front Headlight Bulb on a Daihatsu Copen
How to Replace the Front Headlight Bulb on a Daihatsu Copen
Daihatsu Copen (2002-2012 / MK 1) To replace the front headlight bulb on a Daihatsu Copen, you need to detach the front bumper from the side of the headlight that needs to be removed.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos