Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Control Arm on a Datsun Go?

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Control arm

Video tutorial

To replace the control arm on a Datsun Go, lift the vehicle so that the wheel corresponding to the arm being replaced is not in contact with the ground. This will allow you to loosen the bolts securing the wheel, completely remove it, and access the components behind it. Once the wheel is removed, unscrew the three bolts that secure the control arm at three distinct points.

At this point, you can remove the old control arm and then install the corresponding wheel.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Datsun Go (2013-2022 / MK 1) To replace the fuel filter on a Datsun Go, access the underside of the vehicle near the fuel tank. Here, you will locate the fuel filter, which needs…
Datsun Go (2013-2022 / MK 1) To replace the cabin filter on a Datsun Go, access the side of the footwell on the passenger side to detach the corresponding plastic cover. Under th…
Datsun Go (2013-2022 / MK 1) To replace the front wheel bearing on the Datsun Go, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Once…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos