Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Derbi GPR 50?

Model: Derbi Gpr 50
Part: Engine

Video tutorial

It will be possible to disassemble the engine of the Derbi GPR 50 by loosening the screws that fix it to its housing: this will be located in the lower part of the frame. Once the engine block has been released, it will be possible to proceed by disconnecting the intake and exhaust manifolds and removing the cables connected to the engine: in this way it will be possible to proceed by unscrewing the screws that fix the cylinder head to the top of the engine block.

The cylinder must be removed together with the piston contained internally and connected to the connecting rod: this will provide access to the crankshaft and all the components to be replaced.


Posted on 24 May 2025 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Derbi GPR 50?
How to Dismantle the Engine of the Derbi GPR 50?
Gpr 50 The procedure for dismantling the engine block of the Derbi GPR 50 involves loosening the screws that secure the engine cylinder to its housing, allo…
How to Replace the Coolant on a Derbi GPR 50
How to Replace the Coolant on a Derbi GPR 50
Gpr 50 This guide will show you how to drain and replace the coolant in the engine of the Derbi GPR 50 motorcycle. First, place the motorcycle on a stand, e…
Dismantling the Clutch on a Derbi GPR 50
Dismantling the Clutch on a Derbi GPR 50
Gpr 50 In today's video tutorial, you will see how to dismantle and replace the clutch in simple steps on a Derbi GPR 50, but also on an Aprilia RS 50. Firs…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos