Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the Derbi GPR 50?

Model: Derbi Gpr 50
Part: Engine

Video tutorial

The procedure for dismantling the engine block of the Derbi GPR 50 involves loosening the screws that secure the engine cylinder to its housing, allowing it to be completely removed. Once this cylinder is removed, you can proceed to remove the ring that secures the piston to its connecting rod; this can also be removed from the crankshaft, allowing you to work directly on it. All components within the engine block can be replaced with new spare parts, ensuring everything is functioning.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Derbi GPR 50?
How do you disassemble the engine of the Derbi GPR 50?
Gpr 50 It will be possible to disassemble the engine of the Derbi GPR 50 by loosening the screws that fix it to its housing: this will be located in the low…
How to Replace the Coolant on a Derbi GPR 50
How to Replace the Coolant on a Derbi GPR 50
Gpr 50 This guide will show you how to drain and replace the coolant in the engine of the Derbi GPR 50 motorcycle. First, place the motorcycle on a stand, e…
Dismantling the Clutch on a Derbi GPR 50
Dismantling the Clutch on a Derbi GPR 50
Gpr 50 In today's video tutorial, you will see how to dismantle and replace the clutch in simple steps on a Derbi GPR 50, but also on an Aprilia RS 50. Firs…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos