Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. : Derbi Gpr 50 Racing

How to Replace Brake Pads on a Derbi GPR

Model: Derbi Derbi Gpr 50 Racing
Part: Brake pads

Video tutorial

Today, in this brief video, you will see how to replace the brake pads on your Derbi GPR 50 racing. First, take an 8 mm hex key and a 5 mm hex key, a flat-head screwdriver, and some sandpaper.

Using the 8 mm hex key, unscrew the two 8 mm bolts located at the top of the caliper. Next, unscrew the front bolt with the 5 mm key and remove the retaining pin. This will detach the caliper.

Now, using the screwdriver, widen the caliper to pull out the old pads. Insert the new pads (before inserting the new ones, sand them to avoid excessive friction with the disc) and reattach the caliper by tightening the bolts and reinserting the retaining pin.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on a Derbi GPR 50
Replacing Rear Brake Pads on a Derbi GPR 50
Gpr 50 In today’s video, we will see the steps to remove and replace the rear brake pads on a Derbi GPR 50 motorcycle. First, unscrew the mounting bolts of …
How to Change the Oil in the Derbi GPR 80 Gearbox?
How to Change the Oil in the Derbi GPR 80 Gearbox?
Gpr 80 You can change the oil in the Derbi GPR 80 gearbox by unscrewing the drain plug of the transmission casing, which is located at the lower rear part o…
How to Replace the Carburettor on a Derbi GPR 125?
How to Replace the Carburettor on a Derbi GPR 125?
Gpr 125 To replace the carburettor on the Derbi GPR 125, loosen the screws that secure the component to its housing at the top of the engine block. Once the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos