Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in a Derbi Senda

Model: Derbi Senda 50cc
Part: Checks and maintenance

Video tutorial

To replace the coolant in a Derbi Senda, loosen the bolts on the cover located at the end of the cooling duct. Once the cover is removed, collect the old coolant in a container, facilitating its exit by opening the filler cap. Once the liquid has completely drained, unscrew the impeller and replace its bearing within its housing.

At the end of the operation, close the cover, reconnect the hose, and pour new coolant through the appropriate filler cap.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Senda 50cc To replace the coolant in a Derbi Senda, open the reservoir by removing the cap. Once the cap for topping up is removed, also remove the smaller drai…
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…

How to Assemble the Engine Block of the Husaberg FE 501

Here are the instructions to assemble the engine block of the Husaberg FE 501 enduro bike. First, assemble the engine transmission by installing the gear ratios and then the clutch assembly; after that, install the engine's thermal part by reassembling the crankshaft and then the cylinder head assembly (including piston, cylinder, and head), as shown in the video. At this point, install the stator and flywheel, as well as the electrical components of the engine, following the video tutorial to the end for reassembly!

Watch the video!


by ScegliAuto

More videos