Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fluids on a Derbi GPR 50?

Model: Derbi Gpr 50
Part: Checks and maintenance

Video tutorial

To replace the fluids on a Derbi GPR 50, first identify an oil with the appropriate specifications. Once found, open the oil drain plug located at the bottom of the bike, as shown in the video.

After collecting the used oil in a container, close the plug and top up. To top up the coolant, locate its cap: this is found between the fork and the fairing, on the left side of the bike. Once located, insert a tube into the reservoir and pour in the coolant using a funnel.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How do you replace the stator of the Derbi GPR 50?
How do you replace the stator of the Derbi GPR 50?
Gpr 50 To replace the stator of the Derbi GPR 50, you will need to loosen the screws that secure the cover of the component, which will be located on the le…
How to Replace the Exhaust on a Derbi GPR 50?
How to Replace the Exhaust on a Derbi GPR 50?
Gpr 50 To replace the exhaust on the Derbi GPR 50, loosen the screws that secure the exhaust end can to the supports. Once the old exhaust is freed from its…
How do you disassemble the engine of the Derbi GPR 50?
How do you disassemble the engine of the Derbi GPR 50?
Gpr 50 It will be possible to disassemble the engine of the Derbi GPR 50 by loosening the screws that fix it to its housing: this will be located in the low…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos