Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the stator of the Derbi GPR 50?

Model: Derbi Gpr 50
Part: Checks and maintenance

Video tutorial

To replace the stator of the Derbi GPR 50, you will need to loosen the screws that secure the cover of the component, which will be located on the left side of the bike: once the fixing screws have been loosened, it will be possible to remove the cover to access the stator underneath.

The latter can now be removed from its housing by disconnecting the corresponding cables: it will then be possible to insert the new replacement part in its seat.

After installation, you will need to cover everything with the cover and check its operation.


Posted on 23 November 2025 by ScegliAuto


Related tutorials

Removing the Flywheel and Stator on a Derbi GPR 50
Removing the Flywheel and Stator on a Derbi GPR 50
Gpr 50 In this video tutorial, you will learn how to remove the flywheel and stator on a Derbi GPR 50cc in simple steps. First, remove the left side cover t…
How to Replace the Cylinder Head Gasket on a Derbi GPR 50?
How to Replace the Cylinder Head Gasket on a Derbi GPR 50?
Gpr 50 To replace the cylinder head gasket on a Derbi GPR 50, loosen the bolts securing the cylinder to the top of the engine block, removing the coil and t…
How do you replace the exhaust pipe of the Derbi GPR 50?
How do you replace the exhaust pipe of the Derbi GPR 50?
Gpr 50 To replace the exhaust pipe on the Derbi GPR 50, you need to loosen the screws that secure the exhaust terminal to the appropriate supports, located …

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos