Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust on the Derbi GPR 50, you need to loosen the screws that fix the exhaust terminal to the appropriate supports: once the old exhaust has been freed from its supports, you can proceed by removing the connecting clamp that joins the terminal to the exhaust manifold. By doing so, you can completely remove the old exhaust and install the new one: the new exhaust can now be connected and installed in its place to ensure that everything functions correctly even after the replacement.

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Derbi GPR 50?
How do you replace the exhaust pipe of the Derbi GPR 50?
Gpr 50 To replace the exhaust pipe on the Derbi GPR 50, you need to loosen the screws that secure the exhaust terminal to the appropriate supports, located …
How do you replace the stator of the Derbi GPR 50?
How do you replace the stator of the Derbi GPR 50?
Gpr 50 To replace the stator of the Derbi GPR 50, you will need to loosen the screws that secure the cover of the component, which will be located on the le…
How to Replace the Cylinder Head Gasket on a Derbi GPR 50?
How to Replace the Cylinder Head Gasket on a Derbi GPR 50?
Gpr 50 To replace the cylinder head gasket on a Derbi GPR 50, loosen the bolts securing the cylinder to the top of the engine block, removing the coil and t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos