Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Derbi Senda 50

Model: Derbi Senda 50cc
Part: Engine

Video tutorial

The process of dismantling the engine of a Derbi Senda 50 involves completely removing the block, taking off the side panels and extracting it from its housing after disconnecting the connectors. Once the engine is extracted, you will need to unscrew the bolts securing the two half-cases to remove them and access the internal components.

It will be necessary to remove the ring that secures the piston to its conrod, and you can also loosen the bolts securing the clutch; this way, you can insert the new replacement parts, reassembling the engine in its place.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Remove the Seat from a Derbi Senda 50
How to Remove the Seat from a Derbi Senda 50
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…
How to Start a Derbi Senda
How to Start a Derbi Senda
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…
How to Replace the Spark Plug on a Derbi Senda 50
How to Replace the Spark Plug on a Derbi Senda 50
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…

How to Dismantle the Engine of the Aprilia Leonardo?

To dismantle the engine of the Aprilia Leonardo, loosen the bolts securing it within its housing: once all the mounting bolts for the supports are loosened and the pipes and connectors are disconnected, you can remove the engine from its place. At this point, you can loosen the bolts securing the cylinder at the top of the bike, removing it along with the piston underneath. Once the connecting rod is freed from the crankshaft, you can open the engine block below and replace any internal parts if necessary.

Watch the video!


by ScegliAuto

More videos