Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Checks and maintenance

Dodge Journey - Checks and maintenance

Checks And Maintenance Dodge Journey (2008-2020 / mk 1)

Dodge Journey (2008-2020 / MK 1)
How to replace the external temperature sensor in the Dodge Journey?
In this tutorial we can see how to replace the external temperature sensor in the Dodge Journey, an extremely simple and quick operation. First of all, we open …Read all…
Posted on 4 September 2024 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How to Remove the Ignition Cylinder in the Dodge Journey?
In this tutorial, see how to remove the ignition cylinder in the Dodge Journey, a very simple operation. First, using a plastic spatula, unclip the right air …Read all…
Posted on 9 August 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Car stereo (1) Battery (5) Air vents (2) Transmission (2) Control unit (1) Key (2) Timing belt (1) Air conditioner (2) A/C controls (1) Checks and maintenance (2) Dashboard (1) Headlight (1) Tail light (1) Fog lights (4) Air filter (3) Cabin air filter (3) Diesel fuel filter (1) Fuel injectors (1) Tail light bulb (2) License plate light (1) (1) Handle (3) Starter motor (1) Engine oil (2) Clock (2) Door trim panel (6) Fuel pump (2) Instrument cluster (1) Heater core (1) Wheel (1) Fuse box (10) Seat (2) Side mirror (1) Warning light – error code (2) (2) Tire pressure warning light (3) Service warning light (14) Engine mount (1) Windshield wipers (1) Center console tunnel (1) Blower motor (3) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos