Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Door panel

Dodge Journey - Door panel

Dodge Journey (2008-2020 / MK 1)
How do you remove the rear door panel of the Dodge Journey?
In order to remove the rear door panel of the Dodge Journey, you need to loosen the screws that secure it to its housing: these screws will be found in the …read all…
Posted on 31 March 2024 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
Removal of rear door panel Fiat Freemont - Dodge Journey
Let's see how to remove the rear door panel of a Dodge Journey or a Fiat Freemont. First we open the rear door and go to unscrew with a screwdriver the screw …read all…
Posted on 30 December 2023 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How to remove the door panel of the Journey
Let's see how the Dodge Journey panel is removed. Unscrew the screws located inside the handle and in the space where the door opening lever is housed (remove …read all…
Posted on 19 December 2023 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How to remove the door panel on Dodge Journey
How do you remove the door panel? Let's see the disassembly of the panel of a Journey. Remove the plastic placed above the internal handle with a lever, …read all…
Posted on 16 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Alternator (3) Car stereo (2) Battery (5) Air Vents (2) Gearbox (2) Control unit (1) Timing belt (1) Air conditioning (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (5) Headlight (1) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (3) Diesel filter (1) Injectors (1) Rear light bulb (2) License plate light (1) Handle (3) Starter motor (1) Engine oil (3) Door panel (4) Fuel pump (2) Instrument cluster (4) Passenger compartment heating radiator (1) Fuse box (1) Seat (2) Outside rearview mirror (1) Engine mount (1) Windscreen wipers (1) Central tunnel (1) Interior blower (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos