Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Car stereo

Dodge Journey - Car stereo

Dodge Journey (2008-2020 / MK 1)
How do you reset the Dodge Journey car stereo?
To be able to reset the Dodge Journey car radio, you need to go inside the passenger compartment, so that you can locate the fuse box: the latter is located in …read all…
Posted on 30 April 2023 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
Car stereo replacement on Dodge Journey
Replace the car stereo on the Dodge Journey? Let's disassemble the plastic coverings before removing the car radio, let's see. We detach the surround of the …read all…
Posted on 14 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Alternator (3) Car stereo (2) Battery (5) Air Vents (2) Gearbox (2) Control unit (1) Timing belt (1) Air conditioning (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (5) Headlight (1) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (3) Diesel filter (1) Injectors (1) Rear light bulb (2) License plate light (1) Handle (3) Starter motor (1) Engine oil (3) Door panel (4) Fuel pump (2) Instrument cluster (4) Passenger compartment heating radiator (1) Fuse box (1) Seat (2) Outside rearview mirror (1) Engine mount (1) Windscreen wipers (1) Central tunnel (1) Interior blower (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos