Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Control unit

Dodge Journey - Control unit

Dodge Journey (2008-2020 / MK 1)
Where is the Bluetooth module control unit located in the Dodge Journey?
In this video, we can see where the Bluetooth module control unit is located in the Dodge Journey and how to proceed in case we need to replace it, which is an …read all…
Posted on 8 August 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Alternator (3) Car stereo (2) Battery (5) Air Vents (2) Gearbox (2) Control unit (1) Timing belt (1) Air conditioning (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (5) Headlight (1) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (3) Diesel filter (1) Injectors (1) Rear light bulb (2) License plate light (1) Handle (3) Starter motor (1) Engine oil (3) Door panel (4) Fuel pump (2) Instrument cluster (4) Passenger compartment heating radiator (1) Fuse box (1) Seat (2) Outside rearview mirror (1) Engine mount (1) Windscreen wipers (1) Central tunnel (1) Interior blower (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos