Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dodge Journey -

Dodge Journey (2008-2020 / mk 1)

Dodge Journey (2008-2020 / MK 1)
How to Reset the Tyre Pressure Monitoring System on a Dodge Journey
Here’s how to reset the TPMS on the Dodge Journey after correcting the tyre pressures. Check the tyre pressures according to the values indicated on the …Read all…
Posted on 28 March 2026 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How do you reset the tire pressure monitoring system in the Dodge Journey?
If the tire pressure light on the Dodge Journey is on, it means that one or more wheels are deflated or punctured. Once the exact issue is identified, we …Read all…
Posted on 1 November 2025 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Car stereo (1) Battery (5) Air vents (2) Transmission (2) Control unit (1) Key (2) Timing belt (1) Air conditioner (2) A/C controls (1) Checks and maintenance (2) Dashboard (1) Headlight (1) Tail light (1) Fog lights (4) Air filter (3) Cabin air filter (3) Diesel fuel filter (1) Fuel injectors (1) Tail light bulb (2) License plate light (1) (1) Handle (3) Starter motor (1) Engine oil (2) Clock (2) Door trim panel (6) Fuel pump (2) Instrument cluster (1) Heater core (1) Wheel (1) Fuse box (10) Seat (2) Side mirror (1) Warning light – error code (2) (2) Tire pressure warning light (3) Service warning light (14) Engine mount (1) Windshield wipers (1) Center console tunnel (1) Blower motor (3) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos