Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Engine oil

Dodge Journey - Engine oil

Engine Oil Dodge Journey (2008-2020 / mk 1)

Dodge Journey (2008-2020 / MK 1)
How to replace the engine oil and oil filter of the Dodge Journey
These simple steps will show us how to perform the routine maintenance check, replacing the engine oil and oil filter, of the Dodge Journey, but also of the …Read all…
Posted on 11 May 2024 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
Oil Change on a Dodge Journey
Change the used oil on a Dodge Journey, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to drain …Read all…
Posted on 7 April 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Car stereo (1) Battery (5) Air vents (2) Transmission (2) Control unit (1) Key (2) Timing belt (1) Air conditioner (2) A/C controls (1) Checks and maintenance (2) Dashboard (1) Headlight (1) Tail light (1) Fog lights (4) Air filter (3) Cabin air filter (3) Diesel fuel filter (1) Fuel injectors (1) Tail light bulb (2) License plate light (1) (1) Handle (3) Starter motor (1) Engine oil (2) Clock (2) Door trim panel (6) Fuel pump (2) Instrument cluster (1) Heater core (1) Wheel (1) Fuse box (10) Seat (2) Side mirror (1) Warning light – error code (2) (2) Tire pressure warning light (3) Service warning light (14) Engine mount (1) Windshield wipers (1) Center console tunnel (1) Blower motor (3) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos