Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Handle

Dodge Journey - Handle

Dodge Journey (2008-2020 / MK 1)
Replacement of the external door handle of the Dodge Journey.
Let's briefly see the instructions that will allow us to disassemble and replace the external handle of the front door of the Dodge Journey. First, we open the …read all…
Posted on 3 October 2023 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How to remove the exterior handle on Dodge Journey
Using a screwdriver, unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle. Remove the window …read all…
Posted on 5 December 2023 by ScegliAuto
Dodge Journey (2008-2020 / MK 1)
How to remove the exterior handle of a Dodge Journey
Replacing the damaged handle on a Dodge Journey, let's see how it is assembled and disassembled. Remove the cap from the hole on the door (as shown in the …read all…
Posted on 2 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Alternator (3) Car stereo (2) Battery (5) Air Vents (2) Gearbox (2) Control unit (1) Timing belt (1) Air conditioning (2) Air conditioning controls (1) -board computer (1) Checks and maintenance (5) Headlight (1) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (3) Diesel filter (1) Injectors (1) Rear light bulb (2) License plate light (1) Handle (3) Starter motor (1) Engine oil (3) Door panel (4) Fuel pump (2) Instrument cluster (4) Passenger compartment heating radiator (1) Fuse box (1) Seat (2) Outside rearview mirror (1) Engine mount (1) Windscreen wipers (1) Central tunnel (1) Interior blower (3) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos