Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the windshield wiper relays located in the Dodge Charger?

Model: Dodge Charger LX - Years 2006-2011
Part: Windshield wipers

If the windshield wipers of our Dodge Charger have suddenly stopped working and the various fuses are intact, we can then check the status of the respective relays whose position is indicated in this video. As shown, the relays in question are two and are both located in the box inside the engine compartment, below the black plastic cover on the passenger side. They are the first two relays in the right column, looking at the box frontally. If faulty, make sure to use replacements with equivalent specifications and operate with the vehicle turned off.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Dodge Charger?
What is the fuse layout of the Dodge Charger?
Dodge Charger (2011-2023 / LD) In this video we can see where the fuse boxes of the Dodge Charger are located and what their respective diagrams are, to consult in case we need to …
Where is the fuse box of the Dodge Charger located?
Where is the fuse box of the Dodge Charger located?
Dodge Charger (2011-2023 / LD) If you have not yet been able to locate the box containing all the various fuses of your Dodge Charger, do not worry because in the following guide y…
How do I reset the uConnect system on the Dodge Charger?
Dodge Charger (2011-2023 / LD) In order to reset the uConnect system of the Dodge Charger, you need to turn on the instrument panel and hold down the buttons to raise and lower the…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos