Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel on Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Door trim panel

How do you remove the door panel? Let's see the disassembly of the panel of a Journey. Remove the plastic placed above the internal handle with a lever, unscrew the tightening screws placed inside it. We remove the window control panel. We unscrew the screws in the gap of the opening lever. Once the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel by hand, unhook any power supply terminals and release cable. We mount the previously removed cover panel or a new panel if the old one is damaged.

Posted on 13 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the exterior handle of a Dodge Journey
How to remove the exterior handle of a Dodge Journey
Dodge Journey (2008-2020 / MK 1) Replacing the damaged handle on a Dodge Journey, let's see how it is assembled and disassembled. Remove the cap from the hole on the door (as shown i…
How to disassemble the door panel of the Dodge Journey
How to disassemble the door panel of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the rear door panel of the Dodge Journey. First, we open the rear do…
Disassembly of the door panel of the Dodge Journey
Disassembly of the door panel of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) Following these simple instructions, we will see how to disassemble the front door panel of the Dodge Journey. First, we open the front door of the c…

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos