Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Door trim panel

Let's see how the Dodge Journey panel is removed. Unscrew the screws located inside the handle and in the space where the door opening lever is housed (remove the plastic), unscrew the screws on the entire trim panel. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We mount the new door panel with all the fastening screws and plastic covers. We carry out the maintenance of replacement of the door panel. Before assembling, remember to connect the clamps and the release cable of the handle.

Posted on 5 October 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the exterior mirror on Dodge Journey
How to remove the exterior mirror on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Does the mirror mounted on the Dodge Journey need to be changed? Let's see how it disassembles. We remove the door panel. Unscrew the fastening screw…
How to remove the door panel on Dodge Journey
How to remove the door panel on Dodge Journey
Dodge Journey (2008-2020 / MK 1) How do you remove the door panel? Let's see the disassembly of the panel of a Journey. Remove the plastic placed above the internal handle with a lev…
How to remove the exterior handle of a Dodge Journey
How to remove the exterior handle of a Dodge Journey
Dodge Journey (2008-2020 / MK 1) Replacing the damaged handle on a Dodge Journey, let's see how it is assembled and disassembled. Remove the cap from the hole on the door (as shown i…

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos