Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Tail light bulb

To replace the rear headlamp bulbs on a Dodge Journey, first open the boot of your vehicle. Once the tailgate is open, look at the side of the headlamp where you will find screws that need to be removed. After unscrewing the screws, pull the rear headlamp outwards to remove it. Once the headlamp is removed, disconnect the electrical connector located at the top and another one at the bottom (this allows you to take out the entire housing). To remove the bulb, turn it a quarter turn to the left. After removing the bulb, replace it with a new one and reassemble all parts in reverse order.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light on the Dodge Journey?
How to Replace the Rear Light on the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) As shown in this tutorial, replacing the rear light on the Dodge Journey is a straightforward and quick task. First, ensure the key is not in the ign…
Replacing Headlight Bulb on Dodge Journey
Replacing Headlight Bulb on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Are the rear headlight bulbs on the Dodge Journey blown? Let's replace the headlight bulbs. Open the rear hatch. Unscrew the retaining screws of the …
How to replace the front fog light bulb of the Dodge Journey
How to replace the front fog light bulb of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) In this short and simple guide, we will see how to disassemble and replace the front fog light bulb of the Dodge Journey. First, lift the vehicle and…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos