Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Dodge Durango

Model: Dodge Durango MK 3, WK2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

To reset the oil level, turn on the ignition by pressing the start button twice without pressing the brake pedal; press the button with the down arrow on the left side of the steering wheel until you see 'battery voltage'; now press the button with the right arrow (still on the left side of the steering wheel) until you see 'oil life'; now press and hold the 'ok' button on the left side of the steering wheel; finally, turn off the ignition by pressing the start button and the oil life reset operation is complete.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Dodge Durango (1998-2003 / DN, MK 1) To find the cabin fuse box of your 2003 Dodge Durango, you must first carefully read the following guide and then apply all the various steps describ…
Dodge Durango (1998-2003 / DN, MK 1) In this guide for all you owners of a first-generation Dodge Durango (1999), we will discover where the fuse box containing all the various fuses for…
Dodge Durango (2011-2024 / MK 3, WK2) This brief and simple guide shows how to reset the factory radio in the Dodge Durango, equipped with the Uconnect multimedia system. First, get insid…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos