Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DR
    3. : 1.0 EV

Charging Mode of the DR 1.0 EV

Model: DR 1.0 EV MK 1 - Years: 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

The DR1.0, being an urban electric car, supports standard charging modes for electric vehicles: its performance and charging times depend on its relatively small battery capacity (approximately 17.5 kWh). It can be charged via a domestic charging cable (Shuko) with single-phase alternating current up to 2.3 kW, with a charging time (0/100%) of about 8/10 hours.

Using a Wallbox with a Mennecker type connector, it can be charged with single-phase alternating current up to 7.4 kW, with a charging time (0/100%) of 3/4 hours.

With a public charging station using a CCS combo 2 connector with direct current up to 50 kW, the estimated charging time (0/80%) is 30/40 minutes. This is a rapid boost that should not be used as the sole charging method to preserve the long-term functionality of the battery.


Posted on 30 April 2026 by ScegliAuto


Related tutorials

Charging modes and times for Citroën E-Berlingo
Charging modes and times for Citroën E-Berlingo
Citroen Berlingo (2008-2018 / MK 2) Citroën has long offered the electric version of the Berlingo, called the E-Berlingo, which stands out due to its electric motor powered by batteries…
How to Change the Driving Modes of the Renault Talisman
How to Change the Driving Modes of the Renault Talisman
Renault Talisman (2015-2023 / MK 1) In this brief guide, we will see the instructions that will allow us to change the various driving modes of the Renault Talisman. First, get inside t…
How to Change the Driving Mode in an Opel Mokka A
How to Change the Driving Mode in an Opel Mokka A
Vauxhall Mokka (2012-2019 / Mokka A) Let's see how to change the driving mode on the Opel Mokka A: it is a very simple procedure. Look at the centre of the dashboard, near the tunnel. Th…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos