Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Rear Bulbs on Citroen DS4

Model: DS DS 4 MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Open the boot and remove the small side plastic cover near the lamp. Inside, you will find the rear fixing screws of the headlamp, which you will need to unscrew.

Once done, you can pull the headlamp out of its housing and disconnect the connector. Place the headlamp on a workbench, remove the rear rubber cover, and detach the two wires, as shown in the video.

Now you can extract the inner part of the headlamp, where the three bulbs are fixed, which you can finally replace. To do this, simply unscrew the old bulb and screw in the new one.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery of Citroen DS4
Replacing the Key Fob Battery of Citroen DS4
DS DS 4 (2011-2018 / MK 1) In this video tutorial, you will learn how to disassemble and replace the battery of the key fob for a Citroen DS4. First, take your key fob and pry …
Replacing the Key Remote Battery on a Citroen DS4
Replacing the Key Remote Battery on a Citroen DS4
DS DS 4 (2011-2018 / MK 1) In today's tutorial, we will see how to disassemble and replace, in simple steps, the battery of the remote key for a Citroen DS4. First, take your r…
Location and Diagram of the Fuse Boxes of the Citroen DS4
Location and Diagram of the Fuse Boxes of the Citroen DS4
DS DS 4 (2011-2018 / MK 1) In this video, we see the assignment of the fuses in the Citroen DS4, and in this box, the location of the boxes that contain them. The first box is …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos