Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the Citroen DS4

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Service warning light

If you want to manually reset the service light of your Citroen DS4 first series, you just need to follow these steps. First, get into the car and make sure to start the reset procedure with the instrument panel completely off. Then, insert the key and start the panel while simultaneously holding down the small button located in the lower right part of the panel. Wait a few seconds and, finally, release the button as soon as the completion of the service light reset is confirmed. Turn off the panel and you're done.

Posted on 15 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the service light on a Citroen DS4?
How do you reset the service light on a Citroen DS4?
DS DS 4 (2011-2018 / MK 1) We changed the motor oil in our Citroen DS4 but the service light is still on in the instrument panel, well, in this very short tutorial we are shown…
Service reset on Citroen DS4
Service reset on Citroen DS4
DS DS 4 (2011-2018 / MK 1) Today we are shown, through this very useful video guide, the necessary steps to reset the service light on a Citroen DS4. This operation is really v…
Reset the service warning light on Citroen DS4
Reset the service warning light on Citroen DS4
DS DS 4 (2011-2018 / MK 1) At the end of a certain number of time or kilometers, all cars need to take a service (or Service) and the car will signal this with a warning light …

How to Remove and Reinstall the Rear Wheel Support Plates

To remove and reinstall the rear wheel support plates, first lift the car on a ramp. Then, using a 12 mm socket, unscrew the bolts securing the wheel to remove it. Next, take out the support assembly by unscrewing the relevant bolts. You can then slide out the first plate by unscrewing the bolts with the appropriate spanner. After that, using a 35 mm socket, remove the other bolt that precedes the second plate. Proceed to unscrew all the smaller screws to take it off. To reinstall everything, simply reverse all the steps just mentioned, ensuring to clean all parts thoroughly and lubricate them.

Watch the video!


by ScegliAuto

More videos