Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Upgraded Intercooler Radiator with Pipes

Model: Subaru Legacy BD, MK 2, BG, BK - Years 1993-1998
Part: Turbocharger

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Radiator
How to Remove and Replace the Radiator
Subaru Legacy (1993-1998 / BD, MK 2, BG, BK) If you have radiator issues, here is a video guide on how to remove it. Note that the car in the video has a manual gearbox; if it had an automatic g…
How to Dismantle the Air Conditioning Compressor on a Subaru Legacy
How to Dismantle the Air Conditioning Compressor on a Subaru Legacy
Subaru Legacy (2003-2009 / MK 4, BP, BL) In this video, we will explain how to dismantle the air conditioning system of a Subaru Legacy. Open the bonnet and secure it. Then, detach the plast…
Removal and Replacement of Air Conditioning Circuit on Subaru Legacy
Removal and Replacement of Air Conditioning Circuit on Subaru Legacy
Subaru Legacy (2003-2009 / MK 4, BP, BL) To remove and replace the air conditioning circuit on the Subaru Legacy, proceed as follows: 1) Open the bonnet. 2) Remove the bumper grille. 3) Remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos