Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Air Conditioning Circuit on Subaru Legacy

Model: Subaru Legacy BL, MK 4, BP - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air conditioning

See other generations:
Video tutorial

To remove and replace the air conditioning circuit on the Subaru Legacy, proceed as follows: 1) Open the bonnet. 2) Remove the bumper grille. 3) Remove the securing screw located at the bottom right of the air conditioning radiator. 4) Remove the securing screw from the air conditioning circuit charging port. 5) Disconnect the clips securing the air conditioning circuit in the engine bay. 6) Disconnect the clips from the electrical connections of the air conditioning circuit. 7) Remove the radiator reservoir. 8) Carefully slide the air conditioning circuit out of the engine bay. 9) Proceed in reverse for reassembly and ensure to use new O-rings for the circuit terminals.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
Where to Find the OBD Port of the Subaru Legacy 2011
Where to Find the OBD Port of the Subaru Legacy 2011
Subaru Legacy (2009-2014 / BM, BR, MK 5) If you do not know where the OBD port of your 2011 Subaru Legacy is located, do not worry because this guide will help you find it without any diffic…
How to Replace the Front Bulb of a Subaru Legacy
How to Replace the Front Bulb of a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Before you can begin, open the bonnet of your Subaru Legacy. Start by unfastening and removing the clips that secure the inner wheel arch near the he…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos