Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb of a Subaru Legacy

Model: Subaru Legacy BM, BR, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Before you can begin, open the bonnet of your Subaru Legacy. Start by unfastening and removing the clips that secure the inner wheel arch near the headlamp.

This will give you access to the rear of the headlamp. Next, disconnect the electrical connector attached to the blown bulb.

After that, unclip the bulb retaining clip. Once you have unclipped it, the bulb will be free to remove, completing the disassembly.

To fit the new bulb and close the wheel arch, simply follow this procedure in reverse, and you will have completed the replacement.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Subaru Legacy (2009-2014 / BM, BR, MK 5) Today, learn how to remove and replace the front headlamp bulb on a Subaru Legacy and Outback. First, access the bulb from the wing side: turn the wh…
How to Replace the Front Headlamp Bulb on the Subaru Legacy
How to Replace the Front Headlamp Bulb on the Subaru Legacy
Subaru Legacy (2014-2019 / BN, BS, MK 6) Replacing the front headlamp bulb on your Subaru Legacy (2014-2019) is a straightforward task that takes just a few minutes to complete without any d…
How to Replace the Front Headlamp Bulb on a Subaru Legacy
How to Replace the Front Headlamp Bulb on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) In this brief guide, discover the steps to remove and replace the front headlamp bulb on a Subaru Legacy. First, move to the side of the wheel and st…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos