Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Subaru Legacy

Model: Subaru Legacy BM, BR, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

In this brief guide, discover the steps to remove and replace the front headlamp bulb on a Subaru Legacy. First, move to the side of the wheel and start removing the plastic clips from the wheel arch, thus accessing the back of the headlamp; then remove the protective plastic cover for the bulbs, as shown in the video.

At this point, disconnect the electrical connector and unclip the metal spring to remove and replace the bulb with a new one of the correct type (in this case, type H4). Then reassemble everything!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Subaru Legacy?
How to Replace the Headlight Bulb on the Subaru Legacy?
Subaru Legacy (2009-2014 / BM, BR, MK 5) To replace the headlight bulb on the Subaru Legacy, loosen the screws securing the inner wheel arch panel, unscrewing the screws at the bottom of the…
Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Subaru Legacy (2009-2014 / BM, BR, MK 5) Today, learn how to remove and replace the front headlamp bulb on a Subaru Legacy and Outback. First, access the bulb from the wing side: turn the wh…
How to Replace the Front Headlamp Bulb on the Subaru Legacy
How to Replace the Front Headlamp Bulb on the Subaru Legacy
Subaru Legacy (2014-2019 / BN, BS, MK 6) Replacing the front headlamp bulb on your Subaru Legacy (2014-2019) is a straightforward task that takes just a few minutes to complete without any d…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos