Do it yourself
| ||||
|
Subaru Legacy - Video tutorial
Model: Subaru Legacy
BM, BR, MK 5
- Years 2009-2014 In order to replace the headlight bulb of the Subaru Legacy, you need to loosen the screws that secure the inner panel of the wheel arch, unscrewing the screws at the bottom of the front bumper and those in the inner seat of the wheel arch itself. Once these screws have been loosened, it will be possible to completely remove the wheel arch lining, so that it is possible to access the inside of the headlight assembly; here you will need to disconnect the connector and remove the bulb from inside the headlight, so that you can insert the new one. The new bulb must be inserted into the headlight, repositioning the wheel arch again.
Posted on 29 March 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |