Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Legacy
    4. : How to change low beam bulbs on Subaru Legacy

Subaru Legacy - Video tutorial

Model: Subaru Legacy BM, BR, MK 5 - Years 2009-2014
Part: Headlight
Operation: How to change low beam bulbs on Subaru Legacy

Let's see how to change the dipped beam bulbs of the Subaru Legacy: we will necessarily have to remove the whole front of the car, otherwise it will not be possible to operate on the optical groups. It will not be necessary to remove it completely, but to detach it at least partially. We remove the eight clips that are on the top; there will be as many in the lower part, and then those of the wheel arch. When they're all out, we pull the bumper down, tying it to keep it from falling out. Now we can remove the five sevens that hold the optical group in place. When we have removed them all, we can see all the caps that are behind the light unit. The central one is the low beam, let's snap the metal clip and remove the bulb with a quarter turn. We put in the new bulb - remember not to touch it with bare hands. We snap the clip, close the plastic cap and put the optical unit back in its place with its seven screws. Now we can also replace the bumper, with its eight upper and eight lower screws, plus those of the wheel arch.


Posted on 9 May 2023 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos