Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Subaru Legacy

Model: Subaru Legacy BM, BR, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

Remove the protective cover above the right front headlamp. Using a flat-head screwdriver, a wedge, or your preferred tool, remove the nine clips securing the front bumper from above, then lift the car with a jack and remove the nine clips holding it from below.

Also, remove the clip securing it to the radiator area. At this point, detach the front bumper first from one side and then the other, then pull from the central area and it will come out of its housing.

You can now fit the new bumper by reversing the steps, or you can remove the two front lights as there is nothing obstructing that area.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Subaru Legacy?
How to Replace the Headlight Bulb on the Subaru Legacy?
Subaru Legacy (2009-2014 / BM, BR, MK 5) To replace the headlight bulb on the Subaru Legacy, loosen the screws securing the inner wheel arch panel, unscrewing the screws at the bottom of the…
Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Removing the Front Headlamp Bulb on Subaru Legacy and Outback
Subaru Legacy (2009-2014 / BM, BR, MK 5) Today, learn how to remove and replace the front headlamp bulb on a Subaru Legacy and Outback. First, access the bulb from the wing side: turn the wh…
How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos