Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : How do you replace the radiator of the Subaru Forester?

Subaru Forester - Video tutorial

Model: Subaru Forester MK 2, SG - Years 2002-2008
Part: Radiator
Operation: How do you replace the radiator of the Subaru Forester?

In order to replace the radiator of the Subaru Forester, you need to open the hood so that you have access to the components located inside the engine compartment. In the front part, you will be able to locate the radiator, which can be removed from its housing by disconnecting all the tubes for the coolant passage. Then, you can loosen all the screws that fix the piece to its respective supports, both in the upper and lower part. Once the radiator is completely freed, it will be possible to remove it from its housing and replace it with a new one.


Posted on 17 August 2023 by ScegliAuto



How to replace the radiator on a Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) Before we can start, we will have to go and open the front hood of our Subaru Forester. So let's start by disconnecting the hoses connected to the ra
How do you replace the radiator of the Subaru Forester?
Subaru Forester (1997-2002 / MK 1, SF) In order to replace the radiator of the Subaru Forester you need to access the lower part of the engine compartment, in order to be able to loosen th
Subaru Forester thermostat replacement
Subaru Forester (2002-2008 / MK 2, SG) Let's see in this short and simple guide how to disassemble and replace the Subaru Forester coolant temperature thermostat. First of all we lift the

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos