Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator of the Subaru Forester?

Model: Subaru Forester SF, MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002
Part: Radiator

See other generations:
Video tutorial

To replace the radiator of the Subaru Forester, access the lower part of the engine bay to loosen the screws securing the cover behind the bumper. This will allow you to disconnect the hoses and cables connected to the radiator and also loosen its securing bolts.

Next, repeat the same operation from the upper part of the engine bay. When the radiator and its fan are free, you can extract them and detach the fan from the radiator by unscrewing the appropriate bolts. Therefore, you can install the fan onto the new radiator and place the components into their designated housing.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to replace the radiator on the Subaru Forester?
How to replace the radiator on the Subaru Forester?
Subaru Forester (2002-2008 / MK 2, SG) To replace the radiator on the Subaru Forester, open the bonnet to access the components in the engine bay: at the front, you will locate the radiato…
How to Replace the Radiator on a Subaru Forester
How to Replace the Radiator on a Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) Before you start, open the bonnet of your Subaru Forester. Begin by disconnecting the hoses connected to the radiator by loosening the metal clips an…
How to Locate the Fuses and Understand Their Schematics in a Subaru Forester
How to Locate the Fuses and Understand Their Schematics in a Subaru Forester
Subaru Forester (1997-2002 / SF, MK 1) The first fuse panel in a Subaru Forester can be found inside the vehicle's cabin, located at the bottom left of the steering wheel, behind the dashb…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos