Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Easily Remove a Grille

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Grille

This very short video illustrates the procedure for removing the front grille of the Volvo S40 or Volvo V50. Obtain a flat lever, in this case, a knife. Place one hand at the centre of the grille to hold it steady and use the knife to lever at four points on the lower part of the grille. This way, you will unclip the four clips of the grille. Once this operation is done, the grille will unclip at the bottom; to remove it completely, simply pull it towards you with the hand that was holding it steady. Once removed, you will notice the four clip seats at the bottom and the four slots at the top.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Speaker Disassembly Instructions
Speaker Disassembly Instructions
Volvo S40 (1995-2004 / MK 1) First, remove the metal grille on the dashboard protecting the speaker by prying it with a small flathead screwdriver (apply insulating tape to the t…
Where is the OBD port of the Volvo S40 located?
Where is the OBD port of the Volvo S40 located?
Volvo S40 (1995-2004 / MK 1) To gain free access to the OBD port of your first-generation Volvo S40, simply follow the procedure described in the following guide. First, you need…
How do you replace the timing belt of a Volvo S40?
How do you replace the timing belt of a Volvo S40?
Volvo S40 (2004-2012 / MK 2) The procedure for replacing the timing belt on the Volvo S40 involves opening the hood to access the components located inside the engine compartment…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos