Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Ducati 999 - Videoguide

Ducati 999
How do you replace the front brake pads of the Ducati 999?
In order to replace the front brake pads of the Ducati 999 it is necessary to remove, using a caliper, the pin that fixes the old pads inside the brake …read all…
Posted on 31 August 2022 by ScegliAuto
Ducati 999
How to change the engine oil and the relative filter of the Ducati 999
The guide shows how to change the Ducati 999 engine oil. If you have racing stands, you can use them too. Start the motorcycle to make the oil fluid and remove …read all…
Posted on 16 June 2022 by ScegliAuto
Ducati 999
How to replace the control unit of the Ducati 999/749
Today we will see, in this video tutorial, how to remove and replace the engine control unit of the Ducati 999, but also of the 749. First of all, let's find …read all…
Posted on 20 April 2024 by ScegliAuto
Ducati 999
How to replace rear brake pads on Ducati 999-749
In today's video we will see the steps that will allow us to disassemble and replace the rear brake pads on a Ducati 999, but also on the 749. First we are …read all…
Posted on 6 February 2024 by ScegliAuto
Ducati 999
Fork assembly on Ducati 999
After cleaning it, mount the triple clamp taking care to match the holes on the handlebar pins and screwing it in. To understand which is the right and left …read all…
Posted on 20 January 2024 by ScegliAuto
Control unit (1) (1) Engine oil (1) Brake pads (2)

See also:

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos