Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati 749

In this video tutorial, you will learn how to remove and replace the front brake pads on a Ducati 999 and 749 in simple steps. First, loosen the two bolts holding the caliper using an 8 mm Allen key. Once removed, press the spring inwards to slide out the rear pin, as shown in the video; then lever to retract the piston and remove the old pads. Replace them with new ones, applying the reverse procedure of removal and following the video until the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on Ducati 749 and 999
Replacing the Air Filter on Ducati 749 and 999
749 Replacing the air filter on a Ducati 999 or 749 is extremely simple, and now we will show you how. Yes, because to open the filter box, all you need …
Replacing Spark Plugs on Ducati 749
Replacing Spark Plugs on Ducati 749
749 Disconnect the coil connector by pressing the tab and pulling it out. Unscrew the 10 mm nut, being careful not to lose it, and lift the spark plug ca…
How to Change the Engine Oil on a Ducati 749S
How to Change the Engine Oil on a Ducati 749S
749 To change the engine oil on a Ducati 749S, first, unscrew the drain plug located at the bottom centre of the bike: once the plug is removed, you can …

How to Reset the Trip A Mileage on a BMW R1250 GS

This guide will show you the steps to reset the Trip A mileage on the BMW R1250 GS enduro motorcycle. First, place the bike on its centre stand and turn on the instrument panel. Navigate to the menu settings by pressing the button located on the left of the handlebars, and access the onboard computer where the partial mileage is displayed, as shown in the video. At this point, reset the partial mileage as indicated in the video; you can reset the partial mileage at any time.

Watch the video!


by ScegliAuto

More videos